New weatherboards and verandah decking

So after we had our balcony replaced and it looked so nice (you can read about it here) I decided we needed to go ahead and do the whole front of the house.  That included the verandah posts and decking - basically everything except new windows as I wanted to keep the double hung sash windows.

The builders did a great job and it actually was surprisingly quick.  Old cladding came off, including the power needing to be disconnected briefly due to the old meter box on the front of the house - this was reconnected back up later on the same day when the new boards were put on.

I had a whole lot of photos of the process but unfortunately it seems when I switched to a new phone they were lost.  So instead I will have to make do with some before and after shots!

This is the finished product with the new verandah, poles, and all painted up.  

This is a during shot of me painting the weatherboards (complete with my upside down lights).

The before shots - dodgy handrail, bright blue paint (although you can't see how bad the paint job actually was!).

This before shot shows some of the rotten and dodgy verandah decking boards.  Plus when I had half stripped one window frame!

More before shots.

Before - but I still have the same pots to hang from the verandah!

We used the same Mirbau decking as the balcony and the same profile weatherboards as the upstairs. We also put on a new Colorbond roof on the verandah - which took the longest due to some stuff ups with the roofers and some fairly big variations in quotes.  In the end we could only really afford to do the small portion of the roof and gutter - so we unfortunately have a current patchwork part red and part grey roof!

After the painters we used for the upstairs part did a not particularly brilliant job and still cost a lot of money I decided that I would give painting a go.  My theory was if I was terrible then we could pay someone and not too much damage would be done.  In the end I was pretty happy with the results.  The weatherboards themselves went fine, although the trims weren't so easy (partly because we kept the old windows and even with multiple attempts at sanding and filling they remained fairly lumpy and difficult to paint). My tips for painting weatherboards can be found in this post.

End result though is very pleasing. The colour scheme is Dulux Miller Mood for the weatherboards, with Vivid White for trims and the dark grey for the decking is Ironstone - a colour that matches up to the Colorbond colour of the same name.

Finished product - deck in Ironstone, weatherboards in Miller Mood and trims in Vivid White.  Plus the same hanging pots and dodgy paint job on my cane chairs!

A white picket fence

Turns out this is a historic post now - took me a long time to actually post it up!

After having a bit of a break from our renovations I upped the ante again to try to get things going again.

And first up was the fence.

The picket fence (on top of the green painted sandstone monstrosity) was rotting and paint peeling and cracking.  At first I thought that we could just slap another layer of paint on and cover it up.  I had planned to replace a few palings as needed, but thought I could do a bit of patch up job.

I pulled one of the rough palings off and took it to Fedwood, which is just up the road in Rozelle.  I discovered that to have the palings custom made to match the previous ones (which were bevelled edge) would cost $7 a paling. Which seemed kind of expensive, especially when their run of the mill palings are a lot cheaper.

I got a quote to have the fence replaced and it came to about $4000, which again seemed to be expensive!

After discussions with my neighbour I struck upon a much better plan.  Another neighbour (this is a great street!) is a builder and so he was able to put the fence in for us.  We just paid for materials and labour and hey presto, a fence for significantly less!

But then we had to paint it.  (mind you I was going to have to paint it for the $4000 too!)  So I started with a brush, but it looked kind of streaky.  Then I tried a roller, but it seemed very thin.  And my final attempt was with a spray gun.  I had a few false starts, as the paint was very spattered when it came out , but once I diluted it up more, the spray gun was the winner.  It gives a much more consistent coverage.  My poor husband got the job of holding up a drop sheet so that I didn't paint the cars on the street - not the most fun job but it did seem necessary, as we didn't have any other way of holding it up.

I was pretty pleased with myself when one of my neighbours came past and told me how good it looked - and then said "I'll pay you to do mine!"   Don't think I'll be becoming a professional painter any time soon, but I figured it must look not too bad.

So we have a lovely new white picket fence.  Add some silver numbers for the street number and a fairly stock standard letterbox and it's all good.  Mind you after a eighteen months or so (it takes me a long time to put up these blog posts!) it looks like it needs repainting already if you look at it too closely...

This shows the still partly green sandstone fence (and my appalling lack of weeding - the weeds are coming out through the sandstone!.

Making a study nook (or more commonly known as a desk in an underused space!)

It seems like everywhere you look (if you look at home improvement programs, or decorating magazines) there is something about a "study nook".  So when I came to the conclusion that doing my work spread out all over the dining room table, and keeping work stuff in four different places in the house and carrying the printer up and downstairs to use it wasn't all that practical, I decided I could make a study nook too.  

We actually had the perfect place for it.  After getting our balcony all fixed up off our upstairs bedroom (see the post about that here)  I now feel much more likely to actually use the space and have the french doors open.  Well, I will when it is warmer anyway.  And in the walkway to the balcony was a reasonably large area of dead space.  

The layout was measured up - 207cm long and 193cm wide - so not exactly huge, but certainly enough.  After all I've seen bedrooms in some innerwest terraces that are not all that much bigger!

So I decided all I needed to do was paint the space up and get some furniture.  And bingo, work space that doesn't take up all of the room in the house.

Of course I always forget that painting isn't that easy!  Especially in this room with our unusually shaped ceiling.  Being an old workers cottage we have an extremely steep pitched roof, and the internal ceiling in our bedroom has the internal sloping walls.  So I had to contend with high and strange shaped ceilings.  Plus the previous owners had unusual taste in colours - at least this part was only a mint green before, and not the very dark grey or green that is on the other walls.

One bonus was that the skirting boards had already been taken off when the builders took the floor up for the balcony building- so I could paint in the knowledge we will be putting new white skirting boards on later.

One undercoat and two coats of colour later, I have finished the painting.  I used the same colour as we used for all the walls downstairs, mainly because I had a few litres left.  Of course, I did run out of it when I was halfway through the second coat which caused a mad rush off to buy more. 

It was quite good as I had a bit of a deadline and impetus to finish - I figured fitting out my home office with furniture would be tax deductible and I wanted to claim it in the 2015-2016 tax year - so all had to be done and ready for furniture before the last weekend in June!   Mind you I have now taken almost a year to finish my post!

I used a small table that we had downstairs as a general rubbish collection table and have put it in the space for a desk.  One nice new office chair, a filing cabinet that doubles as the printer stand and a good desk lamp later and voila, my study nook is ready.  Ok, so it's not exactly going to win any prizes for styling and I'm sure that it would ripped apart as boring on any home improvement show, but I'm really happy with the result, and with the fact that now all my work stuff is stored in one place and I can actually find things!

And on a gloriously sunny winter's day like today (these photos are hot off my phone from today!) it's not too bad a spot to sit and do some work - or some blog posts.

Beginner's guide to painting weatherboards

I haven't blogged for a while - too busy actually doing things to the Crooked Cottage!  As I posted about last time, we had our new balcony installed - and it looked fantastic.  I paid someone to paint it, as I didn't fancy (or even know how) to climb up and paint the sides and the fencing around the balcony itself.  

And then it looked so nice I had to do downstairs as well!

So I will post about the actual construction of the new downstairs facade at a future point.  Suffice to say it's done, it looks awesome and now we come to painting.

Being a tightarse frugal person I decided that I could paint the weatherboards myself.  Apart from a ladder there is no particular equipment needed, and I knew it would save us a significant amount of money.  Also as all the boards are brand new there is minimal prep work required.

Through trial and error (and also copying some of the professional painters tricks) I have some tips for anyone else who is going to give this DIY painting a go.

1. Prepwork sucks but it is important

Although I didn't have to sand the new board or strip any old paint, I did have to patch all the nail holes and then clean all the boards as they were dusty and dirty (I still don't have a verandah roof). The better prep you can do the better the finished product.  

Trying to keep the light protected by wrapping it in a plastic bag

2.  Put your painting trays inside large garbage bags

This one I stole from the professional guys.  If your paint trays are like mine and full of dirt from the shed, or remnants of old paint colours then it is much easier and less cleaning.  But the main saviour is the wash up and the environment - when you are done you can just pull the garbage bag off and put it in the bin, no washing up and risk of paint going into drains.  From experience - if you keep the same garbarge bag you probably need to peel the dried paint off first - I had a bad day with little scraps of dried up paint going on to the weather boards so after that I went to just one use per bag. 

3.  Keep a bucket of water to put your brushes into

If your brushes get dry they seem to not work so well.  They get a bit clogged up.  So if you have a few brushes, rotate them and throw them in the bucket in the mean time.  Also once you are done put all the brushes and roller covers into the bucket - nothing worse than ruining all your brushes (yes, I've done it many times) by not washing them out properly and finding them stiff as a board the next day.  The bucket manages this issue and the water can be discarded somewhere safely (not down the drain outside as that goes straight into our harbour!)

4.  Brush the paint on first then roll it

Well this one worked for me.  Brush into all the gaps, edges, and then across the whole weatherboard.  Then you can get the roller and make the finish more even and nicer by rolling up and down but no cracks are missed.  

So it's a slow job but I'm hoping the end result will be worth it!

Weekend DIY projects

Well I did say the next post would be the continuation of my kitchen post, and I am working on that, but first I wanted to show off some of my handiwork from this weekend.  

I felt very productive yesterday, not only knocking over some of the work for my day job, I managed the pre-study for my St John's Ambulance first aid course AND I got started on a few of my new projects.

First up - trying to cut out some tile pieces in the bathroom.  This one wasn't too successful.  For reasons that will be explained in later posts - we have a large gap in the tiles in our bathroom. 

Badly lit photo of the missing tiles in the bathroom

  It seemed like an easy job to fix - just cut out the grout (with my very recently purchased new multi tool) and then replace with two new tiles.

All I needed to do is cut that small piece of tile out

Grout is cut but I don't know how to get the adhesive off

So I managed the cutting of the grout - but I can't get the pieces out!  So I rang my brother (my dad is on a cruise overseas at the moment, so the little brother had to be the go to DIY advice person) who said he thought I needed a cold chisel.  And yes, for a fleeting moment I wondered what Jimmy Barnes had to do with it....  (probably something only Australian readers will get there.  See the link at the end if you want to catch up on classic 80's Aussie rock).

Anyway, I have to admit I've given up on that project until my dad does get back to help me out.

But I had more success with my gardening.  First I planted out two new hanging pots, and have hung them on the verandah, along with my lanterns I bought from Ikea a few weeks back.

Then I got my painter on - and channelled Tara Denis - I saw her do this on Better Home Gardens a while back - by spray painting an old plastic pot to re-use for my new lemon tree. 

The pot previously looked like this - 

This was taken before we settled on the house - the pot I painted is the one of the far right, the dark green colour one.

And after my painting - 

However one tip - I used my shade cloth as the protections between pot and pavers.  Not such as great idea - it's not exactly protective - so I now have some blue marks on the pavers that I am hoping will wash or fade away!

And after my painting project, I also decided to start on another project - the stripping of the paint on the sash windows.  I could tell the paint that was there was not very well done, as it was already lifting and cracking in places.  So I bought myself another new toy - a heat gun - and got to work.  Mind you - safety first - I got a respirator and heat protective gloves.  And then I got stuck in.

My new toys - heat gun, plus my safety equipment - safety is very important!

The current paint job is a blue colour, but is already lifting and cracking in some places

A heat gun is a magical thing!  It looks like a hair dryer but after a few passes over the paint it bubbles and softens - and can be easily scraped off.   No wonder the blue paint was already cracking - it seems like it went straight over a cream layer, which was over a light blue layer, and then a green layer - all just on top of the previous one.

So it would appear there are about four layers of paint to be stripped right back

So I haven't got very far through it yet, although this was only about 25 minutes work before it got dark.  So hopefully by Easter I can strip both windows back totally, and then repaint.  I would definitely recommend using a heat gun for stripping of paint!

And now because I promised to educate you about Cold Chisel  - here's a clip of one of my favourite Chisel songs - Flame Trees

I want it painted....

First job was painting.  I figured this was something we could actually do ourselves, especially as my brother and dad could be roped in to assist.  And to be fair, given the state of the previous paint job, pretty much anyone could have done a better job.  It seemed they had taken a rather abstract approach to the paint job.  Random colour walls, where they made mistakes they just left the paint there (think red brush marks on a yellow ceiling) and possibly worst of all, they seem to have disliked white light switches, so they just painted over.  Brings to mind the Rolling Stones - "I see a red door and I want it painted black" - just substitute in light switch and brown.  Or red.  Or green.  Or in one case, part green and part brown.  

These are some of the before shots - 

The red wall in the lounge room.  Just painted on the ceiling and left it there.  The roof doesn't give the full idea as it was a kind of yellow orange.

The opposite side of the lounge room - this one kind of 70's faux wood panelling.  Took me a long time to realise all the walls had the same texture "panelling" but were just painted different colours - the two ends are both white here.

So you can just about see the painted over light switch here. Just brushed right over. Turns over that was a type of vinyl paint - which had to be peeled off with the help of paint stripper before we could paint over.  Oh and great dark brown door frames.

 

This one shows a bit better the yellow roof.  And more of the dark brown trimmings.  Including cornices, which was just quad.

This is the dining room.  Not sure what was going on with the random yellow/brown paint.  

The spare bedroom.  Okay this was once I'd started painting the wall, it wasn't striped before.  But it was yellow.

The master bedroom - which is actually still the same.  We never did get to paint there (well, not yet).  I thought the crazy colour scheme was kind of cool at first - bit over it now.  So that is grey ceiling in the main arch, white on one end, pale kind of mint green over the balcony, and dark green on the other end and over the ensuite. 

This is the opposite wall of the main bedroom.  And that (although possibly a bit hard to see) is the three quarter brown/quarter green light switch.  At least it is white now, even if the wall is still green.

And after our extensive paint job - here are some of the after shots

The lounge room - white ceiling, white cornices and all the same colour on the walls.  So much nicer!

Slightly patchy ceiling - but this was after four coats and we were over it.

Check it out - white light switches! (installed by our electrician, not a magical paint job) That isn't patchy paint colour on the wall, it's the reflection of light from our new chandelier.

So I hope you agree that it is much better!  The colour we used was Taubman's Twill - a light grey although it seems much bluer than I expected.  Could be that the outside bright blue exterior paint reflects in.

I'm sure that anyone who has ever decided to paint a room has probably sworn never to do it again.  I got out of it a bit by enlisting my brother to paint the ceilings - which he did (not exactly without complaints but with not too much issue) and also dragging in my mum, dad, niece and my husband as well.  But it is a long job, and the prep work is the worst.  Some of our efforts still need a bit of fixing.  We have painted that main arch white now, but the other doorways are still waiting.  

A couple of suggestions I would make to anyone who wants to paint - especially a whole house - 

1.  Undercoat.  We didn't bother with the first ceiling, and regretted it almost immediately when we needed to put 4 coats of ceiling white on, and it was still patchy.  I thought it was saving money not bothering but I think in the end you just buy more of the other paint.  The other rooms turned out much better with the undercoat.  

2.  Buy good quality roller covers and an extension handle.  I didn't realise until later in the painting job that there are different types of material (with different thickness of nap) for different types of paint (semi gloss, gloss etc) and even differences between the same fabrics.  Again, my earlier purchases were cheaper but you get what you pay for.  That said I don't think you need to buy super expensive ones, but just a bit better quality.

3.  Prep, prep, prep.  It's boring and it's hard but the more you sand and smooth and clean up the walls before you paint the better it looks.  As the time wore on we got a bit more lax with the prep and again, those are the walls I now look at and think we need to redo.

4.  Clean up your brushes and roller covers straight away.  This might sound really obvious and stupid but after a long day painting and then going home to where we were renting the last thing I ever felt like was cleaning up the brushes and equipment.  But even if I "put them in to soak" if there were any bits sticking out that dried, the rollers were ruined.  We ended up throwing out a few brushes and roller covers because the paint dried and just could never come out.  So clean them up unless you have unlimited funds for new equipment (and don't care at all about waste and the environment!)

In terms of costs - painting is at least reasonably inexpensive.   It does still add up though by the time you buy the brushes, roller covers, masking tape, sand paper, paint scraper (also handy for smoothing out the walls) and the paint itself.  To be really honest I don't recall how much paint we went through.  At least 12L ceiling white, 8L undercoat, and 20L plus of the colour.  A 10L tin of Taubman's Endure is around $160 or so.

And just because I really like this song -