Monday 13 June 2016

Beginner's guide to painting weatherboards

I haven't blogged for a while - too busy actually doing things to the Crooked Cottage!  As I posted about last time, we had our new balcony installed - and it looked fantastic.  I paid someone to paint it, as I didn't fancy (or even know how) to climb up and paint the sides and the fencing around the balcony itself.  

And then it looked so nice I had to do downstairs as well!

So I will post about the actual construction of the new downstairs facade at a future point.  Suffice to say it's done, it looks awesome and now we come to painting.

Being a tightarse frugal person I decided that I could paint the weatherboards myself.  Apart from a ladder there is no particular equipment needed, and I knew it would save us a significant amount of money.  Also as all the boards are brand new there is minimal prep work required.

Through trial and error (and also copying some of the professional painters tricks) I have some tips for anyone else who is going to give this DIY painting a go.

1. Prepwork sucks but it is important
Although I didn't have to sand the new board or strip any old paint, I did have to patch all the nail holes and then clean all the boards as they were dusty and dirty (I still don't have a verandah roof). The better prep you can do the better the finished product.  

Trying to keep the light protected by wrapping it in a plastic bag

2.  Put your painting trays inside large garbage bags
This one I stole from the professional guys.  If your paint trays are like mine and full of dirt from the shed, or remnants of old paint colours then it is much easier and less cleaning.  But the main saviour is the wash up and the environment - when you are done you can just pull the garbage bag off and put it in the bin, no washing up and risk of paint going into drains.  From experience - if you keep the same garbarge bag you probably need to peel the dried paint off first - I had a bad day with little scraps of dried up paint going on to the weather boards so after that I went to just one use per bag. 



3.  Keep a bucket of water to put your brushes into
If your brushes get dry they seem to not work so well.  They get a bit clogged up.  So if you have a few brushes, rotate them and throw them in the bucket in the mean time.  Also once you are done put all the brushes and roller covers into the bucket - nothing worse than ruining all your brushes (yes, I've done it many times) by not washing them out properly and finding them stiff as a board the next day.  The bucket manages this issue and the water can be discarded somewhere safely (not down the drain outside as that goes straight into our harbour!)

4.  Brush the paint on first then roll it
Well this one worked for me.  Brush into all the gaps, edges, and then across the whole weatherboard.  Then you can get the roller and make the finish more even and nicer by rolling up and down but no cracks are missed.  

So it's a slow job but I'm hoping the end result will be worth it!

3 comments:

  1. I dont plan on doing any painting in the near future but these are very handy tips. Happy painting to you!!

    ReplyDelete
    Replies
    1. Thanks Elisha - seems like it is a never ending job and I've only got a tiny house! Definitely not switching professions to be a painter any time soon ;-)

      Delete
  2. Harrah's Casino & Hotel - MapyRO
    Find Harrah's Casino & Hotel 당진 출장샵 in Maricopa, AZ, 김제 출장마사지 ratings, photos, prices, expert advice, traveler reviews 이천 출장안마 and tips, and 강원도 출장샵 more 고양 출장마사지 information from MapyRO.

    ReplyDelete